Introduction

IS/IEC 62368-1:2023 is the new BIS safety standard for applicable audio/video, information technology and communication equipment covered under India's Compulsory Registration Scheme (CRS). Introduced through the MeitY transition framework, it will replace IS 13252 (Part 1):2010 and IS 616:2017 for notified product categories.

The transition period allows the applicable old and new standards to run concurrently until 1 November 2028. Manufacturers, brand owners and importers should therefore review product applicability, testing requirements, BIS CRS registration and licence migration well before the deadline.

This guide explains the products covered under IS/IEC 62368-1:2023, standards being replaced, migration requirements, deadlines and BIS certification considerations for existing and new applicants.

What is IS/IEC 62368-1:2023?

IS/IEC 62368-1:2023 specifies safety requirements for applicable audio/video, information and communication technology equipment. Unlike the earlier prescriptive standards, it follows a hazard-based safety engineering approach.

The standard focuses on identifying energy sources that may cause injury or damage and applying suitable safeguards against hazards such as electric shock, fire, excessive temperatures and other safety risks.

Depending on the notified product category, it applies to products such as:

• Laptops, notebooks, tablets and other IT equipment

• Televisions and audio/video equipment

• Printers, scanners and office electronics

• Mobile phones and certain communication equipment

• CCTV cameras and recorders

• Power adaptors and applicable power-supply products

• Other products specifically notified under BIS CRS

Standards being replaced:

• IS 13252 (Part 1):2010

• IS 616:2017

Also Check: BIS LED Lamp IS 16102 Certification Guidelines and Compliance Deadline 2026

Which Standards Are Being Replaced?

For the applicable BIS CRS product categories, IS/IEC 62368-1:2023 is replacing the earlier safety standards used for information technology and audio/video equipment.

Key Points

• Products presently covered under IS 13252 (Part 1):2010 will migrate to IS/IEC 62368-1:2023 where specified in the applicable notification.

• Applicable audio/video products presently covered under IS 616:2017 will similarly migrate to IS/IEC 62368-1:2023.

• Any additional standards or essential requirements applicable to a particular product category continue to be relevant where specified.

Also Check: BIS Lighting Standards 2026 Update for IS 10322, IS 16102 and LED Compliance Guide

List of Products Covered under IS/IEC 62368-1:2023

The following table lists the BIS CRS product categories covered by the transition from the presently applicable safety standards to IS/IEC 62368-1:2023. Manufacturers should also check whether any additional product-specific standards or essential requirements apply to their product.

Important Deadline You Must Know

Manufacturers and applicants should plan the migration to IS/IEC 62368-1:2023 well before the end of the applicable transition period. Waiting until the final date may create testing, documentation or application delays.

Also Check: BIS Notification 2026 for XR Devices

Existing Licence Holders, New Applicants and Scope Changes

The compliance route may differ depending on whether a company already holds a BIS registration, is submitting a new application, or intends to add models to an existing scope. Manufacturers should review the latest BIS and MeitY instructions applicable to their specific product category before proceeding.

• Existing Licence Holders: Existing registrants should plan migration of applicable models to IS/IEC 62368-1:2023 in accordance with BIS requirements and the notified transition timeline. Updated testing and supporting documents may be required as part of the migration process.

• New Applicants: During the applicable transition period, applications may be processed according to the standards permitted under the relevant BIS/MeitY notification. Applicants should consider the remaining transition period before selecting the standard for testing and registration.

• Change in Scope / Inclusion of Models: Manufacturers adding new models to an existing registration should verify the applicable standard, series-model grouping requirements and migration conditions before testing or submitting the inclusion request.

• Foreign Manufacturers: Overseas manufacturers should also ensure that their Authorized Indian Representative (AIR), test reports, product marking and registration documents remain aligned with the applicable BIS CRS requirements.

How Absolute Veritas Can Help

Migrating products to IS/IEC 62368-1:2023 may involve product classification, testing, documentation, model grouping and BIS application requirements. Absolute Veritas supports Indian and overseas manufacturers throughout the BIS CRS certification and migration process.

• Regulatory Assessment: Review of the applicable BIS standard, product category and transition requirements.

• Documentation Support: Assistance with preparation and review of documents required for BIS CRS applications, inclusions and migration.

• Testing Coordination: Coordination with BIS-recognized laboratories for testing under the applicable standard.

• Model and Series Review: Assistance in understanding applicable series guidelines and selecting representative models for testing.

• Application Support: Assistance with new registration, inclusion of additional models and migration-related submissions.

• AIR Support: Regulatory support for foreign manufacturers requiring an Authorized Indian Representative for BIS CRS registration.

For assistance with IS/IEC 62368-1:2023, BIS CRS registration, licence migration, testing coordination or Authorized Indian Representative requirements, contact Absolute Veritas.

For more information, please contact us at cs@absoluteveritas.com

Frequently Asked Questions (FAQ)